Make Wavlink Extender Ready To Work With wifi.wavlink.com

The increase in technology is also leading to changes in the devices. Nowadays, because of the extensive use of the internet, networking devices are also being modified. They are becoming more efficient day by day. One example of this is the Wavlink extender. The Wavlink extenders are not just easy to use, but also easy to configure. So, if you don’t want to use the WPS, then you can easily complete the Wavlink Setup with wifi.wavlink.com. As you may have confusion about the steps. Therefore, in this blog, you will get to know about the steps for Wavlink Setup with wifi.wavlink.com. So, let’s get started with the procedure.

Steps To Complete Wavlink Setup With wifi.wavlink.com

In order to use the Wavlink extenders, first, it is important to complete their setup. In order to complete the setup, you need to go with the following steps:

Step 1: Ensure to connect the Wavlink extender in the range of the existing router, otherwise, the setup process could get affected.

Step 2: Also, there should not be interference with the other signals like cordless or microwave devices.

Step 3: Then, connect your system to the Wavlink extender either using the ethernet cable or the wireless connectivity.

Step 4: For wireless connectivity, you may need to enter the password, check the default password on the extender.

Step 5: Now, open Google Chrome or any other web browser.

Step 6: Enter the address as wifi.wavlink.com in the address bar.

Step 7: This will open the login page for the Wavlink setup.

Step 8: Now, enter the default username and password in the fields you have found on the label of the Wavlink extender.

Step 9: Click on the Login button to reach the admin panel of the Wavlink extender.

Step 10: This will open the list of the available networks in the range.

Step 11: Select the name of your host network from the list.

Step 12: Also, enter the security key for your host network.

Step 13: Once connected, the setup is complete for your Wavlink extender.

Step 14: After this, you can do the configuration like changing username or password for admin control.

Step 15: Now, unplug your Wavlink extender if required and connect it to the place which has a weak signal range.

Step 16: Now, try to connect any wireless device with the Wavlink extender.

If your device got connected successfully, then it means you have completed the Wavlink Setup with wifi.wavlink.com. In case, there is an issue, then follow the troubleshooting section mentioned next.

Troubleshooting Of Wavlink Setup

In case, you are not able to access the login screen for the Wavlink setup. Then, follow the steps mentioned below to troubleshoot the Wavlink extender:

Step 1: Make sure you are entering the wifi.wavlink.com in the right way with proper dots.

Step 2: There are no fluctuations in the internet connectivity or loose connections in the case of wired connectivity.

Step 3: Ensure that you are entering the right credentials for the username and password.

Step 4: If nothing works, then reset your Wavlink extender to rectify the internal issues.

So, all these are the steps to troubleshoot if you are facing issues in the Wavlink setup.

Work With The Wavlink Setup

Wrapping up! Wavlink extenders are the ones recognized for providing a better range of the signal compared to other extenders. So, you just need to complete the Wavlink Setup with wifi.wavlink.com, and your network is extended covering all of your home. In case, you face some trouble with the Wavlink setup, and troubleshooting doesn’t help. Then, you can contact our expert team and get the resolution in no time. So, complete your work in any corner of your home with a Wavlink extender and with better connectivity.

Visit Us: https://wifiwav.com/