A Quick Guide To Complete Wavlink AC1200 Router Setup

The internet service has not remained the same as it was 20-30 years back. Now, everyone wants wireless connectivity for their devices. So, to provide wireless connectivity or WiFi, there are a number of devices these days. Similarly, there is one more device to provide wireless connectivity to you. It is a Wavlink AC1200 router. In order to use it, there is a need to complete the wavlink ac1200 router setup first. So, once you have completed the wavlink ac1200 setup, then you can connect any number of devices with it. But, completing the login is not a one-second game. There is a need to complete the wavlink ac1200 router setup using the proper steps. Therefore, in this blog, you are going to find the steps for the wavlink ac1200 setup. So, without wasting much time, just find out the steps to complete the setup for your Wavlink router quickly.

Steps To Complete Wavlink AC1200 Router Setup

Though the Wavlink routers don’t need to be assembled from scratch and it is the plug and play device. But, still there is a need to connect the different hardwares to start the setup of the Wavlink AC1200 router. So, before you start with the Wavlink AC1200 Router Setup on web, there is a need to perform following steps:

1. You must connect the cable coming from the ISP to the modem.
2. Also, connect the internet cable from the modem to the WAN port of the Wavlink AC1200 router.
3. After that, you need to connect the Cat6 ethernet cable to the router and the system. System should be the one in which you are going to complete the setup.
4. Lastly, press the power button to turn on the router and start the setup on your system.

Now, as you have connected all the wires to the Wavlink router, therefore, now you can start with the setup steps:

Step 1: First, make sure you have completed all the steps properly mentioned above.

Step 2: As you have used the ethernet cable for the connection, therefore there is no need for the password.

Step 3: In case, you used the wireless connection, then you can enter the default password mentioned on the router if asked.

Step 4: Now, open the web browser of your choice in the system.

Step 5: Enter the default IP address for Wavlink AC1200 router i.e. 192.168.10.1 in the address field.

Step 6: Then, press the enter key on the keyboard to open the login page for the Wavlink router.

Step 7: In the login fields, enter the default credentials that are mentioned on the Wavlink router.

Step 8: Then, click on the Sign-In button, and you will be on the configuration page for the Wavlink router.

Therefore, click on the required options that you want to configure, and complete the setup. But, what if the Wavlink router is still not working after the configuration?

Troubleshooting For Not Working Wavlink Router After Configuration

Sometimes, during the configuration, one used to make the settings which may interrupt the working of the internet. In that case, you need to troubleshoot the router in a following way:

Step 1: First, if you know which configuration settings have caused it, so revert it back.

Step 2: In case you have no idea, which configuration setting has caused it, then hard reset the Wavlink router. To do so,

• You need to find the reset button first on your Wavlink AC1200 router.
• Then, try to press the reset button with your finger. If not possible, then take a pin-point object.
• Keep it pressed for a few seconds, mostly like 5-7 seconds till all the LEDs go off for once.
• Then, wait for the Wavlink router to turn on again completely so that all LEDs start lighting.
• Once started properly, start the setup procedure again as mentioned above and connect to your network.

In this way, if your Wavlink router is not working, then you can troubleshoot it. With this, you will bring all the settings back to the default. It means whichever configuration setting is creating the problem has been reverted back automatically.

Access The Uninterrupted Network!

Summing up! Though there are a number of routers that have wireless connectivity, Wavlink AC1200 provides the best range. But, as you know, before you start using it, there is a need to complete the Wavlink AC1200 Router Setup. So, you need to go with the above mentioned steps in order to complete the Wavlink AC1200 Setup. Moreover, this guide also contains the troubleshooting steps for Wavlink AC1200 Router Setup. But still, if you are facing any issues with the Wavlink router setup, then you need to talk to the experts. So, dial a toll-free number and get instant help from our team. So, get ready to access the uninterrupted network with the Wavlink AC1200 router.

Visit Us: https://wifiwav.com/